Brackets are available in a myriad of shapes and sizes. Utilizing brackets to help and create a shelf allows the shelf to be coordinated with the room decor, be custom-sized, and be built by an intermediately skilled home decor DIY-er. A number of cabinets, staggered on a wall, make a serious design statement. A shelf placed above a door is a found-house storage answer, and a collection of shelves running round a room’s perimeter, high on a wall, can make a lateral book case for a small library.
Select brackets that may accommodate the chosen shelf. A typical shelf is 12 inches deep. This is the measurement from the front of the shelf to the wall. Brackets are basically “L” -formed; one leg of the L is connected to the wall, the other leg, which protrudes from the wall at a ninety-degree angle, supports the shelf. The size of the protruding leg should be not less than two-thirds of the depth of the shelf. For example, if the desired shelf is 12 inches deep, the supporting legs of the bracket have to be a minimum of 8 inches. Often, both legs of the brackets are the same length; however this is just not a hard rule.
Select the number of brackets to use for the shelf. If the brackets are spaced too far apart, the shelf will sag. A good rule of thumb is to place a bracket each 16 inches. Place one at each end of the shelf, 1 inch from the outside edge, and each sixteen inches along the shelf length.
Mark the wall, with the self-erasing marker, on the place of the beneathside of the shelf. Measure the distance from the ground to this mark. The 90-degree angle of the bracket will probably be aligned with this mark. The shelf will sit on the legs of the brackets that protrude from the wall at this mark. Mark the wall, measuring up from the ground, at 16-inch increments, one location marker for each bracket and one mark for each of the top brackets.
Set up the brackets onto the wall on the indicated bracket locations, following the producer’s directions for attaching the brackets to the wall.
Place the shelf, centered, on high of the brackets and insert screws up by way of the brackets into the underside of the shelf to secure it into position. It’s helpful to pre-drill the screw holes to forestall a wood shelf from splitting.
When you have virtually any issues concerning where by and tips on how to employ Hook Shelf Bracket, you can e-mail us on our web site.